Fountain Troubleshooting

Fountain is assembled and the pump is plugged in but the water doesn't flow. Here are some causes.

Electricity inactive. Check circuit breaker or damaged cord.

Restrictor clamp too tight.

Matter obstructs the pump intake.

Kinked or clogged tubing.

Air lock in the pump. While submersed, plug and unplug the pump several times to clear the air lock.

Not enough water in the fountain.

If the water frequently gets dirty or cloudy, then

Add water clarifier.

Replace the water and rinse the fountain often.

Remove lime deposits as described above.

If the fountain finish is fading with time, then

Apply a light coat of sealer. Contact us to purchase.

Refinish with a refinishing kit, if available. Contact us.